Servo Components & Systems Ltd are pleased to offer a New range of AC- and DC-powered digital drives from Copley Controls, for servo and stepper motors. The DC-powered drives can be panel or PCB mounted. Xenus, Accelnet and Stepnet drives feature CANopen for distributed control.  The New PLUS versions incorporate EtherCAT as well as CANopen and offer expanded feedback options, including Incremental, EnDat, BiSS, SSI, Absolute A, Panasonic, Sanyo Denki, Tamagawa and Resolver encoders. Metal enclosures ensure the highest level of noise immunity. Multi-axis versions of Xenus, Accelnet and Stepnet drives deliver the lowest cost per node. PLUS drives feature high resolution A/D converters for optimal current control as well as fast, hardware-based position capture and setpoint trigger output. http://www.servocomponents.co.uk/

Technology Edge
image1

http://www.servocomponents.co.uk/servo-drives

Field Oriented Control

  • Optimal orientation of magnetic field
  • Motors run faster and cooler

Servo & PWM Performance

  • High-bandwidth nested loops
  • Biquad filter for notch or low pass filters
  • High-efficiency dynamic PWM
  • Edge filter accessories for low emissions

Stepper Technology

  • Smooth, low audible noise
  • Precision microstepping, low resonance
  • Servo mode for closed loop control
  • Detent torque compensation

The Safe Torque Off capability of PLUS Panel drives eliminates the expensive contactors and complex wiring traditionally used in safety critical applications. Safe Torque Off provides two drive enable inputs facilitating system conformance to SIL 3 (IEC 61800-5-2) and Category 3 PLd (ISO 13849-1).

http://www.copleycontrols.com/Motion/Products/Drives/Digital/index.html

image2The New ARGUS GEM sets new levels performance, connectivity, and flexibility. CAN open pplication protocol over EtherCAT (CoE) communication provides a widely used cost-effective industrial bus. A wide range of absolute encoders are supported.Both isolated and high-speed non-isolated I/O are provided. For safety critical applications, redundant power stage enable inputs can be employed.

http://www.copleycontrols.com/Motion/Products/Drives/Digital/argus.html

The New ARGUS GPM operates as a CAN node using the CAN open protocol of D SP-402 for motion control devices. Supported modes include: Profile Position-Velocity-Torque, Interpolated Position Mode (PVT), and Homing. A wide range of absolute encoders are supported. Both isolated and high-speed non-isolated I/O are provided. F or safety critical applications, redundant power stage enable inputs can be employed. Both GEM and GPM drives operate at 14-90VDC and have a continuous current of 30A and 60A Peak.

Ruggedized Drives

image3Copley Controls R-Series drives are ruggedized versions of Xenus and Accelnet. Designed to endure temperature extremes, high humidity, vibration and shock, the R-Series finds application in COTS military, nautical, aviation, oil refining and vehicle-based systems.

Ambient Temp. -40ºC to 70ºC
Thermal Shock -40ºC to 70ºC in 1 minute
Relative Humidity 95% non-condensing at 60ºC
Vibration 5 Hz to 500 Hz, up to 3.85 grms
Altitude -400 m to 5,000 – 16,000 m
Shock 40 g peak acceleration

http://www.copleycontrols.com/Motion/Products/Drives/Rugged/index.html

image4Servo Components & Systems Ltd

Tel: 01202666636

www.servocomponents.co.uk

sales@servocomponents.co.uk