NUM has announced two new brushless servomotor ranges for CNC machinery applications which are said to provide major savings by eliminating the need for a separate encoder cable. Machine builders can now use a single drive-to-motor cable for each motion axis, thereby reducing cabling, speeding installation/commissioning, and improving system performance
NUM has announced two new brushless servomotor ranges for CNC machinery applications which are said to provide major savings by eliminating the need for a separate encoder cable. Machine builders can now use a single drive-to-motor cable for each motion axis, thereby reducing cabling, speeding installation/ commissioning, and improving system performance.
NUM estimates that for a typical high-end CNC machine installation involving 20m cable lengths, the new technology can reduce motor cabling costs by as much as 20 per cent per axis.
Available in 75, 95, 126 and 155mm frame sizes and three different lengths, the new SHX and SPX brushless servomotors offer machine builders a wide choice of output power and speed ratings to match different machinery applications. Both motor ranges feature high mass moments of rotor inertia, optimised for machine tool feed axes, and combine excellent dynamic performance with very smooth running, even at low speeds. The SHX range is intended mainly for cost-sensitive applications and includes models with continuous torque outputs from 1.2 to 20Nm. For applications demanding motors with maximum power-to-volume ratios and a high degree of protection (IP67), such as high-end machine tools, grinding machines and robotics, the SPX range offers units with continuous torque ratings from 1.4 to 23Nm.
Developed for use with NUM’s latest-generation NUMDrive X digital servodrives and Flexium+ CNC platform, SHX and SPX brushless servomotors only require a single cable connection. An innovative embedded digital interface scheme allows the encoder power and position feedback data – together with diagnostic information and thermal data from the motor’s temperature sensor – to be carried on just two shielded wires contained within the motor’s power cable. This approach has significant advantages for machine builders. In addition to lower cabling costs, cable chains are smaller and lighter, the onerous task of installing and debugging cable runs is much less time consuming, and the reduced number of interconnections improves reliability and immunity to electromagnetic interference.
All SHX and SPX brushless servomotors offer a choice of single- or multi-turn digital encoders with medium, 20-bit (1,048,576 positions per turn) resolution and plus/minus 60 arcseconds accuracy.
T: 0871 750 4020