Penny + Giles, a business group of Curtiss-Wright Controls and designer and manufacturer of high precision sensing technology, is supplying its STT280 tilt sensors and SRH280DP rotary sensors to Sarclad to provide critical measurements for an In-Chain Strand Condition Monitor.
The In-Chain Strand Condition Monitor (In-Chain SCM) is permanently installed in the steelmaking process to enable automatic fixed-roll alignment and roll-gap measurements to be performed at the beginning of every casting, without affecting production activities. The Penny + Giles sensors were specified to meet the stringent requirements of a system that is robustly engineered to endure the extremely hostile casting environment.
Commenting for Sarclad, In-Chain SCM manager Richard Cowlishaw says: “With a continuous cast system able to produce in excess of $1million worth of steel a day time is of the essence, so interrupting production to measure the condition of the casting machine could cost steelmakers huge amounts of money. Installing a Sarclad In-Chain SCM system ensures that measurements are taken automatically at the start of every cast, so that costly downtime is avoided and quality of product is maintained.”
The Penny + Giles STT280 tilt sensors are fitted to the In-Chain SCM to measure the fixed-roll alignment of the casting machine using spring-loaded blades that tangent pairs of rolls to measure the angles between them. The data is then processed to identify rolls and segments that are out of position relative to other rolls within each segment.
Sarclad had previously used inclinometers, but specified the Penny + Giles tilt sensor because its compact size and robust construction proved more effective and robust for the application. In addition, because measurements are taken while the continuous cast system is moving, inclinometers were prone to resonate or create a spike output. In contrast, the STT280 tilt sensor features 3D-MEMS technology, which provides a naturally-damped response that is unaffected by knocking or vibration. This feature is especially important for continuous steelmaking operations where accurate measurements are vital.
Sarclad also uses Penny + Giles SRH280DP rotary Hall effect sensors to measure gap displacement on the In-Chain SCM system, replacing the rotary inductive position sensor (RIPS) used in the original design.
When Penny + Giles introduced the SRH280 rotary Hall effect sensor to provide uniform feedback, Sarclad immediately realised its benefits even though it was only initially launched as a single channel sensor. However, the range was programmable, which allowed the company to get the maximum resolution from the 30 degrees rotation output they required. Sarclad now fits the recently developed Penny + Giles SRH280DP two channel version, which can be configured with both channel outputs increasing with clockwise or anti-clockwise shaft rotation, or one clockwise with one anti-clockwise.
The SRH280DP is fitted as part of a gap transducer, which has a spring-loaded rotary arm that extends out to contact the caster rolls to provide an absolute measurement for the distance between the pair of opposing rolls.
The IP68-rated SRH280DP sensor provides reliable and accurate rotary position measurement for extreme industrial environments where shock and vibration can occur.
